The ADVA FSP2000 is a Wavelength Division Multiplexing (WDM)system specifically 
designed for enterprises and service providers,who require a flexible,cost-effective 
system that will multiplex,transport,and protect high-speed data,storage,voice,and video 
applications.DWDM channels to increase virtual fiber infrastructure

-- Future proof and scalable up to 64 DWDM channels to increase virtual fiber 
infrastructure
-- Optional CWDM and CWDM+DWDM hybrid operation substantially minimize channel costs
-- Support of pluggable SFP/XFP technology for CWDM and DWDM
-- Support of all common enterprise applications from 8Mbit/s to 10Gbit/s for higher 
flexibility in service provisioning
-- Remote network management and fiber monitoring through Optical Supervisory Channel
-- IBM GDPS qualified

   Enterprise customers use the FSP 2000 to expand the reach and density of their network 
applications.Due to parallel use of Coarse WDM (CWDM)/Dense WDM (DWDM)and Time Division 
Multiplexing (TDM)technology,up to 512 applications can be transported over one single 
fiber pair.
   The FSP 2000 transparent fiber-in fiber-out interfaces support all protocols in the 
range from 8Mbit/s to 10Gbit/s,including OC-3/12/48/192,STM-/4/16/64,FastEthernet,Gigabit 
Ethernet,10 Gigabit Ethernet,FDDI,ATM,ESCON,Sysplex Timer,Infiniband,and the various 
speeds of FICON,Fibre Channel,and Coupling Link,or any proprietary protocol operating 
within the specified data range.The FSP 2000 system is approved to inter-operate with all 
leading SAN equipment vendors.
   The unique channel card design of the FSP 2000 supports pluggable (SFP/XFP) interfaces 
on all active ports.The ability to automatically adapt data rates and configure the 
signal path via signal cross points enables all network functionalities such as media 
conversion,CWDM,DWDM,protection,regeneration,wavelength conversion on a single universal 
module.This unique design provides unprecedented operational flexibility,simplifying 
installation and maintenance,and reducing inventory expenditure.
   The FSP 2000 supports protected or unprotected point-to-point,linear add/drop, and 
ring network topologies.An integrated monitoring function allows to control the network 
fiber infrastructure and identify degradation processes or intrusion events.Through a 
unique design of the optical filter structure an in-service upgrade path from extremely 
cost-effective CWDM to highly scalable DWDM technology enables optimized access solutions 
for metro optical networks.All systems can be managed via the FSP Element Manager and FSP 
Network Manager software to allow remote system operation and service provisioning.The 
FSP Network Planner guides through all steps of system configuration.

Transport technology
-- DWDM，CWDM，TDM
Wavelengths per fiber pair
-- 1-64
Applications per fiber pair
-- 1-512(depending on TDM density)
Supported topologies
-- Point-to-point,linear add/drop and ring
Optical protection
-- Line protection
-- Card protection
-- Client layer protection with dual homing
Link distance
-- up to >100km/62miles unamplified
-- up to >200km/125miles amplified
Applications
-- FDDI
-- ATM
-- Fast Ethernet
-- Gigabit Ethernet
-- 10 Gigabit Ethernet
-- ESCON
-- 1 Gigabit Fiber Channel
-- 2 Gigabit Fiber Channel
-- 1Gigabit FICON
-- 2 Gigabit FICON
-- ETR/CLO
-- 1 Gigabit Coupling Link
-- 2 Gigabit Coupling Link
-- OC-3/12/48/192
-- STM-1/4/16/64
Clock options
-- 125/155/200/622/1062/12
-- 50/2125/2488/9953/10312 MHz
Optics
-- Local port:>850/1310nm
-- Remote port:C/L-band
-- DWDM:acc.to ITU-T G.694.1
-- CWDM:acc.to ITU-T G.694.2
-- OSC：1310/1510/1625nm
Modules
-- WDM Channel Modules (WCM)
-- TDM Channel Modules (TCM)
-- DWDM Multiplexer/Demultiplexer(MDXM)
-- CWDM Multiplexer/Demultiplexer(CMDXM)
-- Band Splitter Modules(BSM)
-- Remote Switch Module (RSM)
-- Optical Supervisory Channel Module(OSCM)
-- Optical Amplifiers(EDFA)
-- Dispersion Compensation Module(DCM)
-- Network Element Management Interface (NEMI)
-- Device Element Management Interface (DEMI)
Management
-- Optical Supervisory Channel (OSC)
-- SNMP Agent
-- FSP Element Manager
-- FSP Network Manager
-- FSP Network Planner
Agency compliance
-- CE，FCC，TUV，GS，UL，CUL
Power
-- 90~132/180~264VAC
-- -60VDC~-38VDC
-- Power consumption max.>150W
Environmental
-- Temperature +5 to +45 °C
-- Relative humidity 10% to 90%(non-condensing)
Physical
-- Weight 33 pounds/15 kg per base unit
fully loaded
-- Dimensions:width x depth x height
              19 in.x 12 in.x 8.8 in.
-- 482mm x 305mm x 223mm